161 tools for universal use in ABS thermoformed trays :

• combination wrenches 6÷21 mm
• combination wrenches 22 – 24 – 27 – 30 – 32 mm
• pin punches Ø 2 – 3 – 4 – 5 – 6 mm
• centre punch Ø 4 mm
• double open end wrenches 6×7 – 8×9 – 10×11 – 12×13 – 14×15 – 16×17
  18×19 – 20×22 – 21×23 – 24×26 – 27×29 – 30×32 mm
• offset hexagon key wrenches 1,5 – 2 – 2,5 – 3 – 4 – 5 – 6 – 8 – 10 mm
• double ended offset ring wrenches 6×7-8×9-10×11-12×13-14×15-16×17-18×19 mm
• offset hexagon key wrenches 2-2,5-3-4-5-6 mm
• drivers for Torx® head screws, with handles T10-T15-T20-T25-T27-T30
• 1/2" square drive hexagon sockets 10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-30-32 mm
• 1/2" drive, socket drivers for hexagon screws 5-6-8-10-12 mm
• 1/2” wobble extension bar 125 mm
• 1/2” wobble extension bar 250 mm
• 1/2" drive universal joint
• 1/2" drive sliding T-handle 305 mm
• 1/2" drive reversible ratchet 
• 1/4" hexagon sockets 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm
• 1/4" socket drivers for hexagon screws 2,5-3-4-5-6-8 mm
• 1/4” drive extension bar 50 mm
• 1/4” drive extension bar 150 mm
• 1/4" drive universal joint
• 1/4" drive spinner handle
• 1/4" drive swivel T-handle 115 mm
• 1/4" reversible ratchet
• Heavy-duty diagonal cutting nippers 160 mm
• half-round needle nose pliers 180 mm
• Extra-long needle nose pliers 160 mm
• circlip pliers straight, internal 180 mm
• circlip pliers bent, internal 170 mm
• circlip pliers straight, external 175 mm
• circlip pliers bent, external 175 mm
• Slip joint pliers boxed joints 250 mm
• self – locking pliers 240 mm
• screwdrivers for cross head Phillips® screws 2,5×50-3×75-3,5×100-4×125-5,5×100-5,5×150-6,5×150 mm
• screwdrivers for cross head Phillips® screws 8×150-8×200-10×200 mm
• screwdriver for slotted head screws, extra-short series 4×30-6,5×30 mm
• screwdrivers for cross head Phillips® screws PH0x60-PH0x100-PH1x80-PH1x120-PH2x100-PH2x150 mm
• screwdrivers for cross head Phillips® screws PH3x150-PH4x200 mm
• screwdriver for cross head Phillips® screws, extra-short series PH1x30-PH2x30 mm
• flat chisels, ribbed type 100-200 mm
• engineer’s hammer 300 g
• soft face hammer Ø 35 mm
• second-cut square files 200 mm
• second-cut triangular files 200 mm
• second-cut flat files 200 mm
• second-cut half-round files 200 mm
• second-cut round files 200 mm