TOP PERFORMANCE TPR Cilinder kit - Ø50 mm Slag 39,2 mm

TOP PERFORMANCE TPR Cilinder kit – Ø50 mm Slag 39,2 mm

🔍
TOP PERFORMANCE TPR Cilinder kit - Ø50 mm Slag 39,2 mm

TOP PERFORMANCE TPR Cilinder kit – Ø50 mm Slag 39,2 mm

€460.50

Op voorraad

Past op deze motoren
  • APRILIA AREA 51 1998–2002
  • APRILIA GULLIVER 50 1993–2002
  • APRILIA RALLY 50 1993–2006
  • APRILIA SCARABEO 50 1993–2005
  • APRILIA SONIC 50 1994–2015
  • APRILIA SR 50 1993–2012
  • BENELLI 491 GT 50 1998–1999
  • BENELLI 491 RACING 50 1998–2001
  • BENELLI 491 RR 50 1999–2001
  • BENELLI 491 SP 50 1999–2001
  • BENELLI 491 SPORT 50 1998–1999
  • BENELLI 491 ST 50 1999–2001
  • BENELLI K2 50 1998–2001
  • BENELLI NAKED 50 2002–2003
  • BENELLI PEPE 50 1999–2004
  • BETA ARK 50 1996–2013
  • BETA EIKON 50 1998–2007
  • ITALJET DRAGSTER 50 1994–2006
  • ITALJET FORMULA 50 1996–2004
  • MALAGUTI CENTRO 50 1993–2000
  • MALAGUTI CIAK 50 1999–2002
  • MALAGUTI F10 50 1992–1993
  • MALAGUTI F12 PHANTOM 50 1994–2010
  • MALAGUTI F12R PHANTOM 50 2007–2010
  • MALAGUTI F15 FIREFOX 50 1996–2008
  • MALAGUTI YESTERDAY 50 1997–2002
  • MBK EQUALIS 1995
  • MBK EVOLIS 1993–1995
  • MBK FIZZ 1994–1995
  • MBK FLIPPER 1998–2005
  • MBK FORTE 1994–1996
  • MBK MACH-G 2002–2015
  • MBK NITRO 1997–2017
  • MBK OVETTO 2T 1997–2018
  • MBK SORRISO 1995
  • RIEJU FIRST 50 1996–1997
  • YAMAHA AEROX 1997–2018
  • YAMAHA AXIS 50 1995–1996
  • YAMAHA BREEZE 50 1995
  • YAMAHA JOG 50 1993–2015
Artikelnummer: 1127339 Categorie: Merk:

ATTENTION: Cylinder with flange center distance 51 mm. For NARDÒ/NARDÒ II muffler use exhaust pipe ref. 9934190

 

Cylinder Kit ø 50 “TPR” for Maxi Kit P/N. 9926580 (stroke 39,2 mm)

Contents

1 MA combustion chamber cover

1 Cylinder Ø 50 Racing Aluminium stroke 44 mm (only for part no. 9926560)

1 Cylinder Ø 50 Racing Aluminium stroke 39 mm (only for part no. 9926580)

1 Gap weight piston Ø 50 Racing

1 Chromium plated piston ring Ø 50 x 1

1 Exhaust flange gasket

1 Special screw M14 x 1.25; L = 11 water drain

1 H2O head reduction (GAS 1/8)

1 Pin 12 x 40

2 Pin retaining ring Ø 12 AC 

1 Roller cage Ø 12 x 15 x 15 

1 Shaped OR Ø 104.37 x 3.53 

1 Water drain screw gasket Ø 14.1 x 22 x 1 

1 Compression seal Viton OR Ø 53.7 x 1.78

8 Green Viton OR Ø 6.35 x 1.78

1 Green Viton OR Ø 22.22 x 2.62 

1 Cylinder base gasket

1 Crankshaft stroke 39.2 mm (only for part no. 9926580)

1 Crankshaft stroke 44 mm (only for part no. 9926560) 

1 Combustion chamber stroke 44 mm (only for part no. 9926560) 

1 Combustion chamber (only for part no. 9926580) 

2 Bearing SKF 6204ETN9/C3

1 Oil seal flywheel side 

1 Oil seal clutch side 

4 Stud bolt M7 x 1; L = 115 mm (only for part no. 9926560)

 

Gerelateerde producten